|
|
 |
3.
Nomenclature,
descriptive of the
Rifle
Musket.
MODEL
OF 1855.
Fig,
1. Barrel, one-seventh size. a,
breech; b, cone-seat; c, rear-sight; d,
front sight and bayonet-stud; e, muzzle.
Fig,
2. Breech-screw, full size . a, plug
with threads; b, tenon; c, tang; d,
tang-screw hole; e, face.
Fig,
5. Tang-screw, full size.
Fig,
4. Cone-seat screw, full size . a,
stem; b, head; c, slit; d,
thread.
Fig,
3. Cone, full size. a, nipple; b,
square; c, shoulder; d, screw-thread; e,
vent.
Fig,
6. Ramrod, one-seventh size; a,
stem; b, swell; c, head; d, cup; e,
screw. |
 |
|
|
|
|
|
|
|
|
4.
Fig.
8. Section through a, a, full size.
Fig.
9. Section through b, b, full size.
|
|
|
|
|
|
|
|
5.
Fig.
11. Leaf Spring, full size.
a,
blade; b, screw-hole; c, thickness.
Fig.
12. Leaf Spring screw, full size.
a,
head; b, stem; c, holes for
screw-driver..
Fig.
13. Slide, full size.
a,
back-piece; b,b, grooves; c, c, rivet-holes;
d,
d, handles; b, sight
notch; c, rivets;
Fig.
14. Slide-spring, full size.
a,
sight-notch; b, b, rivet-holes; c, thickness..
Fig.
15. Joint-pin,, full size.
|
|
|
|
|
|
|
|
6.
Fig.
16. Front sight and bayonet-stud, full
size.
a,
sight; b, stud.
Figs.
17-18. Bayonet-clasp, full size.
a,
body; b, b, stud; c, bridge
d,
groove; e, e, stops;
f,
screw.
Fig.
19. Bayonet, quarter size.
a,
blade; b, neck; c, socket;
d,
bridge; e, stud mortice;
f,
clasp
|
|
|
|
|
|
|
|
|
|
7.
Fig.
20. Lock, outside view, half size.
a,
hammer; b, lock-plate;
c,
magazine-cover; d, tumbler-screw;.
e,
joint-pin; f, side-screw hole;
Fig.
21. Lock, inside view, half size, showing the
parts with the hammer at half cock.
a,
hammer; b, tumbler; c, bridle
d,
bridle-screw; e, sear; f, sear-screw;
g,
sear-spring; h, sear-spring screw;
i,
mainspring; j, swivel; k, cover-catch;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13.
|
|
Fig.
36. Stock, one-ninth size.
a,
butt; b, handle;
c,
head
d,
bed for lock;
e,
shoulder for lower band;
f,
bed for band-spring;
g,
shoulder for middle band;
h,
bed for band-spring;
i,
shoulder for upper band;
j,
bed for band-spring;
k,
shoulder and tenon for tip;
|
|
|
|
|
|
|
|
|
14.
Fig.
51. Butt-plate and screws, quarter size,
three views.
a,
body; b, toe; c, heel;
d,
d, screw-holes; e, e, screws.
Fig.
38. Tip, full size, two views.
a,
recess for stock; b, groove for ramrod;
c,
rivet-hole; d, rivet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17.
Figs.
50. Wiper, full size.
a,
body; b, b, prongs; c, screw-hole for rod.
Fig.
51. Ball-screw, full size.
a,
body; b, tang; c, screw-hole for rod.;
d,
screw to draw the ball.
Fig.
53. Screw-driver, half size, two-views.
a,
cone-wrench; b, b, b, blades; c, rivet;
d,
d, collets for rivet.
|
|
|
|
|
|
|
|
17.
Figs.
53. Spring-vice, half size.
a,
bolster; b, slide; c, slide-mortice;
d,
slide-screw; e, thumb-screw.
Fig.
54. Upper side of a slide.
Fig.
55. Tompion, half size.
a,
head; b, body; c, rivet.;
d,
leather washer; e, slot.
Fig.
56. Cone, (spare,) see Fig. 3
|
|
|
|
<<<<
Previous Page Next
Page >>>> |
|
|
Copy
and Use Restrictions:
The content, information, graphics, design, compilation, products,
software, services and all other matters related to this web site
("Materials") are protected by law, including, but not limited
to, U.S. Copyright law and international treaties. Except as
stated herein, none of the Materials may be copied, reproduced,
distributed, republished, downloaded, displayed, posted or transmitted
in any form or by any means, including, but not limited to, electronic,
mechanical, photocopying, recording, or otherwise, without prior written
permission. The navigation, design and text used are the
Intellectual Property (IP) of the website author. Copyright ©
2003, 2008. All Rights Reserved.
www.usregulars.com
- U.S. Regulars Archive |
